Preliminary QSFP-DD MSA optical transceiver specification released

Sept. 29, 2016
The members of the Quad Small Form Factor Pluggable Double Density Multi Source Agreement (QSFP-DD MSA) Group have released preliminary hardware specifications, including drawings, for the new optical transceiver form factor. Announced this past March, the QSFP-DD aims to leverage the four-lane QSFP pluggable form factor electrical interface to support transmission of 200 or 400 Gbps.

The members of the Quad Small Form Factor Pluggable Double Density Multi Source Agreement (QSFP-DD MSA) Group have released preliminary hardware specifications, including drawings, for the new optical transceiver form factor. Announced this past March, the QSFP-DD aims to leverage the four-lane QSFP pluggable form factor electrical interface to support transmission of 200 or 400 Gbps (see "QSFP-DD MSA targets 200G, 400G optical transceivers"). The group also expects the optical module to be interoperable and backward compatible with the current QSFP+/QSFP28 form factors.

The QSFP-DD specifications include eight lanes of up to 25 Gbps via NRZ modulation or 50 Gbps via PAM4. The size of the device should enable 36 QSFP-DD modules to fit in a single switch slot, providing up to 14.4 Tbps of aggregate capacity.

The MSA founder-promoters include Broadcom, Brocade, Cisco, Corning, Finisar, Foxconn Interconnect Technology, Huawei, Intel, Juniper Networks, Lumentum, Luxtera, Mellanox Technologies, Molex, Oclaro, and TE Connectivity.

The preliminary hardware specification defines module, plug, and cage characteristics. A common mechanical outline is used for QSFP-DD modules and direct-attach cable plugs. Modules and plugs will be able to self-lock with the cage upon insertion. QSFP+/QSFP28 modules and cables may be plugged into and operate in the new QSFP-DD port as well.

Other QSFP-DD specification details include:

  • A dual-port integrated connector in a 2×1 stacked cage
  • A single-port SMT connector and cage
  • Each QSFP-DD port provides 76 electrical contacts
  • New modules with heat sink options for thermal management flexibility.

The QSFP-DD preliminary hardware specifications are available for download at www.qsfp-dd.com. Mechanical samples will be available from some respective member companies (the MSA group didn’t release a list of these companies).

Work on the full specification should finish by early 2017. The group continues to welcome interested parties to join as Contributor members.

For related articles, visit the Optical Technologies Topic Center.

For more information on optical transceivers and suppliers, visit the Lightwave Buyer’s Guide.

Sponsored Recommendations

March 12, 2025
Join us for an engaging discussion with industry experts on the intersection of AI and optics. Moderated by Sean Buckley, editor-in-chief of Lightwave+BTR, this panel will explore...
March 25, 2025
Explore how government initiatives and industry innovations are transforming rural broadband deployments, overcoming cost and logistical challenges to connect underserved areas...
April 9, 2025
As transceiver speeds increase, so do thermal challenges. Discover key insights into innovative cooling solutions that ensure optimal performance and reliability.
April 10, 2025
The value of pluggable optics in open-line systems is also becoming more apparent. This webinar describes this trend and explores how such modules can best be employed. Register...