QSFP-DD MSA Group offers rev 6.0 specifications for QSFP-DD800, QSFP112
The Quad Small Form Factor Pluggable Double Density (QSFP-DD) Multi Source Agreement (MSA) group has released revision 6.0 of its hardware specifications. Rev. 6.0 provides initial specifications for QSFP-DD800 and QSFP112 optical modules. The group also released an updated Common Management Interface Specification (CMIS) revision 5.0 for QSFP-DD, QSFP-DD800, and QSFP112 modules as well as a whitepaper on thermal management.
The key advance in rev. 6.0 is the support of 100-Gbps electrical host interfaces. These enable the QSFP-DD800 to be optimized for 8x100G operation and the QSFP112 to meet 4x100G requirements. Elements of Rev. 6.0 include:
- QSFP-DD800 and QSFP112 mechanical and board definitions
- QSFP112 electrical and management timing
- Updated power supply test methods and support for an increased module power rating to 25 W
- An increase in the module power contact rating from 1 A to 1.5 A
- An appendix with normative connector performance data.
The updated CMIS revision 5.0 complements the new QSFP-DD800 and QSFP112 form factors. The CMIS defines the host-to-module interactions needed to ensure consistent initialization and operation. The revision provides several extensions and technical and editorial consolidation. The MSA says the CMIS described in the update is “harmonized” with the timing parameters defined in the previously published QSFP-DD MSA HW Spec revision 5.1 as well as the new revision 6.0.
Finally, the new whitepaper addresses thermal management issues that may arise in conjunction with the high-power 25-W modules that the QSFP-DD800 specifications will enable. The whitepaper describes thermal management techniques that can be applied to both QSFP-DD/QSFP-DD800 module design and QSFP-DD/QSFP-DD800 system design. Experimental and simulation study results are reported that demonstrate the efficacy of these techniques.
“The performance and power demands for high-speed network solutions are constantly increasing,” said Mark Nowell, founding member, and MSA co-chair. “This whitepaper captures the design experience garnered over the recent years from many companies and was written to help design engineers understand how they can achieve the thermal characteristics their system requires, even when using new 25 W modules, thus ensuring the reliable operation of their products.”
The new specifications are available on the QSFP-DD MSA website. “It is exciting to see how the 63 companies involved came together to harmonize these important QSFP/QSFP-DD form factors and software to future-proof data centers while maintaining backward compatibility,” added Scott Sommers, founding member, and MSA co-chair.
For related articles, visit the Optical Technologies Topic Center.
For more information on optical modules and suppliers, visit the Lightwave Buyer’s Guide.
To stay abreast of fiber network deployments, subscribe to Lightwave’s Service Providers and Datacom/Data Center newsletters.
Stephen Hardy | Editorial Director and Associate Publisher, Lightwave
Stephen Hardy is editorial director and associate publisher of Lightwave and Broadband Technology Report, part of the Lighting & Technology Group at Endeavor Business Media. Stephen is responsible for establishing and executing editorial strategy across the both brands’ websites, email newsletters, events, and other information products. He has covered the fiber-optics space for more than 20 years, and communications and technology for more than 35 years. During his tenure, Lightwave has received awards from Folio: and the American Society of Business Press Editors (ASBPE) for editorial excellence. Prior to joining Lightwave in 1997, Stephen worked for Telecommunications magazine and the Journal of Electronic Defense.
Stephen has moderated panels at numerous events, including the Optica Executive Forum, ECOC, and SCTE Cable-Tec Expo. He also is program director for the Lightwave Innovation Reviews and the Diamond Technology Reviews.
He has written numerous articles in all aspects of optical communications and fiber-optic networks, including fiber to the home (FTTH), PON, optical components, DWDM, fiber cables, packet optical transport, optical transceivers, lasers, fiber optic testing, and more.
You can connect with Stephen on LinkedIn as well as Twitter.