Broadcom unveils 40G/50G PAM-4 physical layer chip

Dec. 18, 2014
Broadcom Corp. (NASDAQ: BRCM) has introduced what it claims is the industry's first high-speed four-level Pulse Amplitude Modulation (PAM-4) physical layer transceivers (PHYs). The new PAM-4 PHYs enable serial transmission rates of 40/50 Gbps over multiple physical media, including direct attach cables (DAC) and fiber-optic cable.

Broadcom Corp. (NASDAQ: BRCM) has introduced what it claims is the industry's first high-speed four-level Pulse Amplitude Modulation (PAM-4) physical layer transceivers (PHYs). The new PAM-4 PHYs enable serial transmission rates of 40/50 Gbps over multiple physical media, including direct attach cables (DAC) and fiber-optic cable.

There is growing demand for higher speed and more bandwidth over currently deployed infrastructure. As a result, system OEMs are looking at ways to optimize 40 Gigabit Ethernet and 100 Gigabit Ethernet connectivity. PAM-4 technology has emerged as a popular choice for these applications (see the webinar "Verifying PAM4 Performance in 28G & 56G Designs").

Broadcom's BCM82040 and BCM82004 devices are the first in a line of 40/50/100GbE devices optimized to meet these requirements. Built on 28-nm semiconductor process technology, the BCM82040 and BCM82004 PHYs support higher data throughput over existing low-bandwidth channels by transmitting more bits per symbol.

PAM-4 coding enables the transmission of 40 Gbps data rate at a symbol (baud) rate of 20 Gbaud. Thus, the PAM4 line code in the new PHYs require half the bandwidth of non-return-to-zero (NRZ) line code, resulting in higher throughput and lower total system cost and power consumption.

The device comes in two flavors. The BCM82040 is optimized for transmitting 40/50 Gbps over optical fiber and the BCM82004 is optimized for transmitting 40/50 Gbps over DACs. Broadcom's PAM-4 PHYs come in a 7x7-mm package that fits within the QSFP+ form factor cable assembly and optical modules.

Both PHYs are designed to transmit and receive 40/50G data over two pairs of media versus eight pairs of media using 4x10G QSFP-enabled cables. In 40G applications, the BCM82040 reduces the number of optical components and optical fibers required by a factor of four, compared to a 4x10G approach.

Both devices are now sampling.

For more information on communications ICs and suppliers, visit the Lightwave Buyer's Guide.

Sponsored Recommendations

How AI is driving new thinking in the optical industry

Sept. 30, 2024
Join us for an interactive roundtable webinar highlighting the results of an Endeavor Business Media survey to identify how optical technologies can support AI workflows by balancing...

The AI and ML Opportunity

Sept. 30, 2024
Join our AI and ML Opportunity webinar to explore how cutting-edge network infrastructure and innovative technologies can meet the soaring demands of AI memory and bandwidth, ...

Advancing Data Center Interconnection

July 25, 2024
Data Center Interconnect (DCI) solutions provide physical or virtual network connections between remote data center locations. Connecting geographically dispersed data centers...

Advances in Fiber & Cable

Oct. 3, 2024
November 7, 2024 1:00 PM ET / 12:00 PM CT / 10:00 AM PT / 6:00 PM GMT Duration: 1 hour Already registered? Click here to log in. A certificate of attendance...