NEL sampling second-generation 20-nm coherent DSP

Sept. 22, 2014
NTT Electronics (NEL) says that its long-awaited follow-on to the merchant DSP ASIC used widely in the first generation of coherent transceivers has reached the sampling stage. The NLD0640, a co-development with Broadcom Corp. (NASDAQ: BRCM) (see "NTT Electronics, Broadcom pair for coherent DSP"), is based on 20-nm technology to provide a low-power option for long-haul and metro coherent optical transceivers and line cards.

NTT Electronics (NEL) says that its long-awaited follow-on to the merchant DSP ASIC used widely in the first generation of coherent transceivers has reached the sampling stage. The NLD0640, a co-development with Broadcom Corp. (NASDAQ: BRCM) (see "NTT Electronics, Broadcom pair for coherent DSP"), is based on 20-nm technology to provide a low-power option for long-haul and metro coherent optical transceivers and line cards.

The NLD0640 has provides an integrated Optical Transport Network (OTN) framer as well as transmitter mux chips. The combination of functionality and use of 20-nm technology offers a device that requires 70% less power and footprint versus the company’s first-generation 40-nm NLD0629 DSP.

Broadcom is supplying 20-nm signal-processing and enhanced mixed-signal technology to the project.

The chip supports three operational modes: the lowest power 80-km ZR mode, a power-managed metro mode that supports 1,200-km reaches, and a long-haul mode for distances greater than 2,000 km. It dissipates less than 20 W, which means it should be applicable to CFP and analog CFP2 coherent optical modules.

NEL says it expects the device, first announced in 2013, to be in production during the first quarter of 2015. With the success of its first-generation device, the company has significant good will in place with existing customers. However, it will have significantly more competition for upcoming designs, given the fact that ClariPhy Communications’ competing LightSpeed-II CL20010 system on a chip (SoC) is already in production and supports 200-Gbps operation as well as 100 Gbps (see "ClariPhy 200G coherent DSP chip reaches production").

For more information on communications ICs and suppliers, visit the Lightwave Buyer’s Guide.

About the Author

Stephen Hardy | Editorial Director and Associate Publisher

Stephen Hardy has covered fiber optics for more than 15 years, and communications and technology for more than 30 years. He is responsible for establishing and executing Lightwave's editorial strategy across its digital magazine, website, newsletters, research and other information products. He has won multiple awards for his writing.

Contact Stephen to discuss:

  • Contributing editorial material to the Web site or digital magazine
  • The direction of a digital magazine issue, staff-written article, or event
  • Lightwave editorial attendance at industry events
  • Arranging a visit to Lightwave's offices
  • Coverage of announcements
  • General questions of an editorial nature

Sponsored Recommendations

Next-Gen DSP advancements

Nov. 13, 2024
Join our webinar to explore how next-gen Digital Signal Processors (DSPs) are revolutionizing connectivity, from 400G/800G networks to the future of 1.6 Tbps, with insights on...

How AI is driving new thinking in the optical industry

Sept. 30, 2024
Join us for an interactive roundtable webinar highlighting the results of an Endeavor Business Media survey to identify how optical technologies can support AI workflows by balancing...

On Topic: Fiber - The Rural Equation

Oct. 29, 2024
RURAL BROADBAND:AN OPPORTUNITY AND A CHALLENGE The rural broadband market has always been a challenge for service providers. However, the recent COVID-19 pandemic highlighted ...

The Road to 800G/1.6T in the Data Center

Oct. 31, 2024
Join us as we discuss the opportunities, challenges, and technologies enabling the realization and rapid adoption of cost-effective 800G and 1.6T+ optical connectivity solutions...