Optical interface extenders

Dec. 1, 1997

Optical interface extenders

The fom II Series Model F2300 interface extenders provide synchronous, full- duplex, half-duplex, or simplex data transmission at 44.736 Mbits/sec over distances to 15 km. These DS-3 multimode extenders provide link margins of 15-dB with 62.5/125-micron cable, 10.3 dB with 50/125-micron cable, or 19.5 dB with 100/140-micron cable. Singlemode versions operate with 8/125-, 9/125-, or 10/125-micron cables. The units come packaged in a single- or dual-card desktop enclosure or in a 19-inch rack-mount, dual-card, side-by-side or 20-card chassis. Measuring 7 ¥ 11.6 ¥ 0.85 inches, the interface extenders can be mounted vertically or horizontally, depending on the application.

Versitron

New Castle, DE

Sponsored Recommendations

ON TOPIC: Filling Coverage Gaps, Enhancing Public Safety

Jan. 30, 2025
With the ongoing drive to support AI and the need for high-speed data center interconnection, the call for higher-speed 800G optical technology is emerging. Initially focused ...

Innovating the network edge with 100ZR QSFP28: The next frontier in coherent optics

Jan. 15, 2025
In this webinar, Juniper Networks, EXFO and Precision Optical Technologies are teaming up to showcase the new 100ZR QSFP28 pluggable coherent technology, exploring its foundational...

Linear Pluggable Optics – The low-power optical interconnects for AI and Hyperscaled data centers.

Dec. 23, 2024
This LightWave webinar discussion will review the important technical differentiators found in this emerging interconnect field and how the electro/optic interoperability and ...

ON TOPIC: Options for Next-Generation PON

Aug. 31, 2021
An increasing number of operators are looking at 10G PON as the next step in their fiber access evolution. But how long will 10G PON meet their requirements -- and are their other...