This product addresses a burgeoning need to conveniently identify light in bend-insensitive fibers. Judge's Comment.
The FI-100 Fiber Identifier can detect non-intrusively the presence of light or signal in a fiber-optic cable. When the device is clamped onto the fiber being tested, a small macrobend is induced to cause a small portion of light to spill onto the detector's diodes. Specific fiber adapters are used so the optimum bend radii can be placed on the fiber-optic cable.
This process permits the maximum sensitivity for detecting low level signals that might be emitted from bend-insensitive fibers. The non-intrusive technique allows the technician to check if light is present in the cable without disconnecting a potentially critical service. The insertion loss that is induced during the test will not lead to an alarm condition or disrupt signal transmission, Greenlee says.
Click here to return to the 2015 Lightwave Innovation Awards page
Sponsored Recommendations
Sponsored Recommendations